レシーバーですが、袋に入っているものの剥き出しで見栄えも悪いので、適当なレシーバーボックスで代用してきれいに纏めます。
Regarding a receiver box, the radio receiver is nakedly put on the battery, though the receiver being in the small nylon bag. It looks not good, so a suitable receiver box is to be installed to clear the mess.
Regarding a receiver box, the radio receiver is nakedly put on the battery, though the receiver being in the small nylon bag. It looks not good, so a suitable receiver box is to be installed to clear the mess.
アソシエイテッドのNTC3用レシーバーボックスを使用します。実はOfnaやHotbodies、Traxxas T-Maxx用などいろいろ試しましたが、アソシの物が一番ぴったりきました。
Team Associated receiver box for NTC3 is my choice, actually I tried to fit boxes from Ofna, Hotbodies and Traxxas but Associated receiver box was better than others.
Team Associated receiver box for NTC3 is my choice, actually I tried to fit boxes from Ofna, Hotbodies and Traxxas but Associated receiver box was better than others.
イクストリームレーシングのカーボンプレートを固定するねじの頭が干渉し、レシーバボックスをきちんと設置出来ないので、適当なプラスチックのブッシュを使って脚を付けました。
Because Screws's, which are screwed on Extreme racing made carbon graphite plate, button heads disturb the receiver box installation properly, plastic bushings installed on underside of the box as legs.
Because Screws's, which are screwed on Extreme racing made carbon graphite plate, button heads disturb the receiver box installation properly, plastic bushings installed on underside of the box as legs.
かなり見た目がすっきりしました。固定はジップタイです。なお、スロットル用サーボからの配線が短くてすごいギリギリです。転倒等の衝撃でボックスが取れた時に断線などが起こりそうです。Revo純正のケーブルを使って延長ケーブルを作って見ましたが、やっぱり信号線はシビアなのかサーボが反応しませんでした。フタバ純正の延長ケーブルが無難なようです。
Now looks cool isn't it, the box is fixed by zip ties.
Tips: An electric cable from throttle mixing servo is short and is barely connected up the receiver. If the zip ties for the receiver box is broken due to whatever incident etc, the electric cable may be snapped. I generated an extended cable using genuine servo cables from Traxxas, but it didn't work. Futaba genuine extended cable should be acceptable.
Now looks cool isn't it, the box is fixed by zip ties.
Tips: An electric cable from throttle mixing servo is short and is barely connected up the receiver. If the zip ties for the receiver box is broken due to whatever incident etc, the electric cable may be snapped. I generated an extended cable using genuine servo cables from Traxxas, but it didn't work. Futaba genuine extended cable should be acceptable.
No comments:
Post a Comment